<rp id="b99t1"><sub id="b99t1"><progress id="b99t1"></progress></sub></rp>
<listing id="b99t1"><sub id="b99t1"><sub id="b99t1"></sub></sub></listing>

<track id="b99t1"><form id="b99t1"><th id="b99t1"></th></form></track>

      <listing id="b99t1"></listing>

        <th id="b99t1"></th>

        <th id="b99t1"><thead id="b99t1"><th id="b99t1"></th></thead></th>
          <big id="b99t1"></big>
          High Temp chamber
          High temperature chamber
          Introduction: this chamber is suitable for the product (complete machine), parts, materials to perform high temperature storage test.
           
           

          WG series detailed parameters
          Type WG3002 WG3006 WG301
          Performance parameters Temperature range RT+20~+300℃
          Temperature fluctuation ≤1℃(≤±0.5℃,according to GB/T5170-1996)
          Temperature uniformity ≤2℃(RT+20℃~+200℃)
          Temperature deviation ±2℃(RT+20℃~+200℃)
          Heating up time 90min(room temperature →+300℃)
          Structure Shell Cold-rolled steel plate with two-sided electrostatic spray powder(ivory)
          Inner wall material Stainless steel plate
          Thermal insulation material Glass wool
          Test hole One at the left side
          Inner dimension (mm) D 500 800 1000
          W 600 800 1000
          H 700 1000 1000
          External dimension (mm) D 780 1080 1280
          W 1320 1490 1690
          H 1160 1580 1580
          Installed power 3.6kW 10kW 12kW
          Power supply AC220V±10%,50Hz±1 single phase + ground wire and grounding protection resistance is less than 4Ω 380V±10%,50Hz±1 three phase four wire + ground wire and grounding protection resistance is less than 4Ω
          Satisfy the standards GB/T 2423.2、GJB 150.3
           
           
          Chongqing Yinhe Experimental Equipment CO.,LTD. 2012 渝ICP備09054543號 技術支持:Hansa